THE WATER-ALCOHOL INJECTION KITS CONTAIN 3 NOZZELS THAT RANGE FROM 3 GPH (GALLONS PER HOUR) DOWN TO 1 GPH.  THESE KITS CAN ALSO BE MODIFIED TO THE USERS NEEDS. 
THE WATER-INJECTION SYSTEM WILL:
  • PREVENT PREIGNITION
  • HELPS KEEP INTERNAL ENGINE PARTS COOLER
  • ALLOWS LOWER OCTANE FUEL TO BE USED
  • PREVENTS CARBON BUILD-UP ON THE VALVES AND THE TOPS OF THE PISTONS
  • THE WATER INCREASES OCTANE OF FUEL
  • THE ALCOHOL KEEPS THE AIR COOLER ALLOWING A MORE DENSE INTAKE CHARGE
  • ALLOWS MORE BOOST
  • MORE BOOST EQUALS MORE POWER
  • WATER INJECTION INCREASES PERFORMANCE AND RELIABILITY 

THIS SYSTEM INCLUDES

  • 250 LB PUMP
  • ADJUSTABLE PRESSURE SWITCH
  • HOSE
  • WIRE WITH WIRING DIAGRAM
  • FITTINGS
  • 4 QUART HOLDING TANK

WATER-ALCOHOL INJECTION SYSTEM
WaterInjectionPhoto.jpg
ALL PARTS INCLUDED

These water/alcohol injection kits will fit all the turbocharger kits.  
The water/alcohol kit will allow the turbo kit to be used on higher compression engines.  This system will provide more boost in the higher compression engine and eliminate all pre-ignition, rattle, and engine knock.  Plus the addition of more fuel in the form of a water/alcohol mix will make more exhaust causing the turbo to spin faster making even more boost.